2-jaw angular grippers - Series DCT / CT
Several accessories (adjustable stop, magneto resistive or inductive sensors) allow this gripper to be used in a number of applications. The full jaw opening (180°) means that the part can be direct fed, avoiding any release movement by the robot or by the actuator. DIRECTCONNECT™ mounting on back of body (sizes 12-25). Standard mounting on top. This gripper is designed for use in confined spaces. Its shielded design repels chips and other particulate from the internal drive mechanism.
2-jaw angular grippers for food handling - Series FUA
This gripper series is designed for direct product contact in the food zone, according to the food industry standard. (EN 1672-2) All parts are corrosion resistant, non-toxic, non-contaminating, non-porous, non-absorbent and non-reactive. Its stainless steel design resists chemical cleaning procedures.
The optional body conforms to FDA standards and is made of High Performance Polymer for a significantly lighter weight. Its electro-polished exterior with no recessed or inaccessible zones prevents retention of contaminants and simplifies cleaning. The sealed motion components (IP69K design) are made for high-pressure and high-temperature daily cleanings. Any metal/metal contact is protected by a gasket for leakproof assembly against bacteria. This angular gripper design offers easier radial sealing of jaws.
The optional security springs help with external gripping, in case of air supply failure, in single acting or spring assist mode. There are no external fasteners to avoid any foreign matter in food. This gripper contains special lubricants suitable for food industry and a long maintenance-free service life
Markets
Product | Opening angle | Gripping force (lbsf) | Spring support | Weight (lb) | Cylinder Diameter (in) |
---|---|---|---|---|---|
CT-32M | 180 | 61 | No | 1,59 | 1.26 |
CT-32M-RE | 180 | 79 | Yes | 1,83 | 1.26 |
CT-40M | 180 | 100 | No | 2,60 | 1.57 |
CT-40M-RE | 180 | 133 | Yes | 3,06 | 1.57 |
CT-50M | 180 | 146 | No | 4,01 | 1.97 |
CT-50M-RE | 180 | 201 | Yes | 4,87 | 1.97 |
DCT-12M | 180 | 7 | No | 0,20 | 0.47 |
DCT-12M-RE | 180 | 9 | Yes | 0,26 | 0.47 |
DCT-12M-RE | 180 | 16 | No | 0,35 | 0.63 |
DCT-16M-RE | 180 | 19 | Yes | 0,44 | 0.63 |
DCT-20M | 180 | 25 | No | 0,62 | 0.79 |
DCT-20M-RE | 180 | 32 | Yes | 0,73 | 0.79 |
DCT-25M | 180 | 35 | No | 1,08 | 0.98 |
DCT-25M-RE | 180 | 45 | Yes | 1,26 | 0.98 |
FUA-63M | 70 |
|
Optional | 3,75 | 2.48 |
Flohr Industrietechnik GmbH - Im Unteren Tal 1 - D-79761 Waldshut-Tiengen - Phone: +49 (0)7751 / 8731-0 - info@flohr-industrietechnik.de