Short info: Universal encoder systems
U-ONE Generation I - speed switch module
The speed switch modules are electronic overspeed switches that monitor the defined speeds for overspeed and underspeed. By design they include a switching delay, an inverse direction of rotation evaluation, a direction of rotation dependent switching function and the option to perform a switch test. They are easily programmed via the decoder interface.
Attribute | Value |
---|---|
Supply voltage | 12-30 VDC |
Signal outputs/Interfaces |
|
Module UO-EM-EGS4: | 2 speed switches (NO contact 2-230 V / 0.5 A AC/DC), 4 selectable operating ranges available: 0.63-300 rpm / 2.5-1200 rpm / 5-2400 rpm / 10-3000 rpm |
|
1 system monitoring switch (NO contact 2-230 V / 0.5 A AC/DC) |
|
Programmable functions via decoder module UO-EM-D2: Password protection, inverse direction of rotation evaluation, overspeed and underspeed, switching delay, direction-dependent switching function, switch test, monitoring |
Module UO-EM-EGS41 SIL 2: | 2 speed switches (one each NC contact and NO contact, max. 230 V / 0.5 A AC/DC), operating range 0.5-2700 rpm |
|
1 Diagnostics switch (NC contact, max. 230 V / 0.5 A AC/DC) |
|
1 potential-free reset input (12…30 VDC) |
|
Programmable function via mini USB: Password protection, inverse direction of rotation evaluation, overspeed and underspeed, direction-dependent switching function, switching delay, open-circuit recognition, delayed overcurrent switch off, switch test, monitoring |
Electrical connection |
|
Module UO-EM-EGS4 | Screw terminals to connect switches |
|
Series connectors to preceding and following modules (internal bus connection) |
Module UO-EM-EGS41 SIL 2 | Screw terminals to connect switches and reset input |
Abmessungen (L x B x H) | Series connectors to preceding and following modules (internal bus connection) |
|
Mini USB to facilitate programming functions (software EGS 41 Pro) |
Dimensions | 99.5 x 45 x 114.5 mm (modular electronics housing for DIN rail) |
Device temperature range | -25 °C to +70 °C |
Degree of protection | IP20 (switchboard installation) |
Device options | Combines with other modules belonging to the U-ONE System |
Special features and certificates | UOM 41L and associated modules UO-…-… 41: SIL 2 (DIN EN 61508); PL d (DIN EN ISO 13849), UL/CSA |
Flohr Industrietechnik GmbH - Im Unteren Tal 1 - 79761 Waldshut-Tiengen (Allemagne) - Téléphone : +49 (0)7751 / 8731-0 - info@flohr-industrietechnik.
Table des matiéres Contact Conditions générales de vente Mentions légales
Politique de confidentialité Politique de confidentialité courriel