Proven under very difficult application conditions, the function of MALMEDIE safety couplings is characterised by high precision of disengagement recurrences and rapid easy reset!
Thus the drive components of equipment can, on the one hand, be effectively protected from damage due to overload, and on the other hand lost production time can be significantly reduced. Unlike shear pins or shear rings, the safety-elements are not destroyed when disengagement is triggered, and can quickly be reactivated with the simplest tools, such as a hammer.
If needed, two or more safety-elements can be used for form-fitted and tensionally locked connection of two coupling flanges.
Optional automatic re-engagement is availale.
Main applications
ATEX
II 2 G T4/TS/T6 -20°C <= Ta <= +65°C/+55°C/+40°C
II 2 D T100°C
Main applications
Size | Shut-off force / safety element (N) Fu min | Shut-off force / safety element (N) Fu max |
---|---|---|
10 | 5.435 | 13.180 |
20 | 15.700 | 36.724 |
30 | 81.853 | 185.264 |
40 | 264.838 | 511.542 |
All safety coupling parts are manufactured according to strict internal quality control procedures. Modern CNC manufacturing technology ensures the interchangeability of individual parts. All power-transmitting clutch parts are made of high-quality heat-treated steel. Wear is reduced through the precise selection of materials and appropriate hardening processes.
When the safety overload process is triggered, the safety assemblies are not destroyed and can be quickly reactivated using simple tools such as a plastic hammer. In contrast to shear pins or shear rings which need to be replaced. Depending on requirements, two or more safety assemblies can be used for the connection of the two coupling flanges. Despite their compact design, the safety assemblies transmit more than adequate axial torque when they are engaged.
Axial forces. These must be absorbed by a special, precise and stable bearing arrangement on the two coupling flanges and must kept away from the connected drive parts - such as motor, gearbox, etc.
The MALMEDIE safety couplings are suitable for use in forward or reverse operation. Due to the complexity of the applications, MALMEDIE safety couplings are almost exclusively adapted to customer requirements. Only the safety elements are standard parts.
Each safety coupling is controlled with high precision due to the design of the safety elements. The design and calculation of the coupling is done specifically according to your application. Alternatively, you can of course select the suitable element from our programme. We will be happy to support you in the selection of the coupling.
Flohr Industrietechnik GmbH - Im Unteren Tal 1 - 79761 Waldshut-Tiengen (Allemagne) - Téléphone : +49 (0)7751 / 8731-0 - info@flohr-industrietechnik.
Table des matiéres Contact Conditions générales de vente Mentions légales
Politiquede confidentialité Politiquede confidentialité courriel
Suivez-nous
sur : Facebook | Instagram | LinkedIn