Short info: Accessories electronical
Pulse converter / signal converter for encoder signals
Pulse converters are utilized for purposes of electrical isolation, signal level conversion and elimination of interference signals; they also convert HTL to TTL as well as TTL to HTL. The output stages are equipped with the latest driver ICs, and enable signal transmissions along long lengths of cables in conjunction with high output frequencies. Optocouplers isolate the inputs from the outputs. Short-circuits and output stage overload are signalled. The modules can be snapped onto standard mounting rails EN 50 022.
Attribute | Value |
---|---|
Product usage | Encoder signal outputs, convert (HTL in TTL or TTL in HTL) |
Supply voltage | 12-30 VDC |
Signal input | HTL (square wave 12-30 V) or TTL (square wave 2.8-6 V) |
Signal output | HTL or TTL (0°, 90°, N and respective inverted signals) |
Frequency range | 0 - 250 kHz |
Casing | Electronic housing for standard mounting rail |
Dimensions | 50 x 75 x 52 mm |
Device temperature range | -20 °C to +70 °C |
Degree of protection | IP20 |
Electrical connection | 18 pole PHOENIX COMBICON screw terminals 2.5 mm² |
Device options | Isolated conversion of HTL in TTL or vice versa with different supply voltages |
|
OM 3-1-1: HTL/HTL: 12 - 30 V |
|
OM 3-1-2: TTL/HTL: 12 - 30 V |
|
OM 3-1-3: HTL/TTL: 5 V |
|
OM 3-1-4: TTL/TTL: 5 V |
|
OM 3-1-5: HTL/TTL: 12 - 30 V |
|
OM 3-1-6: TTL/TTL: 12 - 30 V |
Flohr Industrietechnik GmbH - Im Unteren Tal 1 - 79761 Waldshut-Tiengen (Allemagne) - Téléphone : +49 (0)7751 / 8731-0 - info@flohr-industrietechnik.
Table des matiéres Contact Conditions générales de vente Mentions légales
Politique de confidentialité Politique de confidentialité courriel