Short info: Absolute encoders
Singleturn absolute encoders for rough conditions
The singleturn absolute encoders AL...40 for loopers are especially designed for the most extreme conditions with shock loads up to 450 g. The encoders are mostly deployed in roll stands in hot rolling mills between the roll housings where they are subject to high levels of energy. The singleturn absolute encoders supply precise information about the angle position of the looper, which is used for the highly dynamic feedback speed control of the rollers. At the same time singleturn absolute encoders AL...40 achieve a service life that is many times longer than that of other models. Lubricated with special grease their ball bearings offer an approximately 40 per cent higher load rating.
Attribute | Value |
---|---|
Supply voltage | 12-30 VDC |
Resolution | Singleturn max. 16 bit (65536 steps per rotation) |
Number of interfaces | 1 |
Interface/Product Name | SSI (Gray; Binär; Inkremental) | ALS 40 |
Parallel | ALPA 40 | |
HTL,TTL | FGL 40 | |
Maximum rotation | Solid shaft: up to 4000 rpm |
Electrical connection | Terminal strip in a terminal box, Fixed cable |
Construction type / Ø shafts | Solid shaft (B5, B35): Ø 11 mm, Ø 14 mm with feather key |
Device temperature range | -25 °C to +100 °C |
Degree of protection | IP66 / IP67 |
Weight | Approx. 3.5 kg |
Device options | Preset function (preset 1000) |
Special features and certificates | Ball bearings with 40% higher load rating, strengthened shaft, UL/CSA |
Flohr Industrietechnik GmbH - Im Unteren Tal 1 - D-79761 Waldshut-Tiengen - Phone: +49 (0)7751 / 8731-0 - info@flohr-industrietechnik.de