Universal encoder system UOC 40 / USC 42 U-ONE Gen. II

 
 

Compact-System

 
 
Universal encoder system - compact
 
 
1
2
3
4

Short info: Universal encoder system | Generation II

  • A modular encoder system with attached function modules in a robust housing
  • Position and speed monitoring, both optionally available with safety certification SIL 2 / PL d
  • Signal transmission via copper cable
  • Resolution: absolute 13 bit singleturn / 15 bit multiturn and incremental up to 4096 ppr
 
 
 

Universal encoder system - compact

The compact U-ONE(-SAFETY)-Compact universal encoder systems for speed and position monitoring improve performance by making optimal use of permitted speed ranges and fast and precise positioning. The encoder systems combine different functions in a robust housing and are therefore ideal for the simple modernization of existing solutions when continuing to make use of legacy cabling or when there is no space in the switchboard for electronic function modules. The all-in-one encoder systems are directly mounted onto the shaft that needs to be monitored. They therefore require no additional mechanical components such as distribution gears, distribution couplings or speed increasing gears and additionally offer higher accuracy. The simple parameter input and preset function after maintenance work ensure high system availability. The encoder systems are optionally available with all components certified for use in safety applications with requirements up to SIL 2 / PL d.



 
 
Attribute Value
Supply voltage 15-27 VDC
Resolution Multiturn 15 bit (32768 rotations)
Singleturn 13 bit (8192 steps per rotation)
Switching outputs Speed and position switch modules (NO contact 5…230 V / 0.5 A AC/DC):
Speed switch (0.5-2520 rpm)
Position switch (max. 32768 rotations)
Failure switch. Further switching functions on request
Signal outputs/Interfaces
Basic unit (SCU) Current output 4-20 mA (without SIL)
Incremental output 1024 / 4096 pulses configurable (without SIL)
Status output and error output
Absolute value interface (bus module) UOC 40 PROFIBUS-DP (without SIL): Resolution: 12 bit singleturn / 12 bit multiturn
Absolute value interface (bus module) USC 42 PROFIsafe via PROFIBUS-DP (SIL 2 / PL d): Resolution: 13 bit singleturn / 15 bit multiturn
(PROFIBUS-DP: RS485, baud rate 9.6 kbit/s...12 Mbit/s, device address 1-99 possible)
PROFIsafe via PROFINET IO (SIL 2 / PL d), (PROFINET IO: Transmission rate 100 Mbit/s)
Maximum rotation Solid shaft: up to 2800 rpm
Electrical connection Base module: Terminal box (copper cable) + USB interface
Switching module: Terminal box (copper cable)
Termination module: Fieldbus box
Construction type / Ø shafts Solid shaft (B5, B35) / Ø 14 mm with feather key
Device temperature range -25 °C to +70 °C
Degree of protection IP66
Weight Approx. 3.6 kg + 0.8 kg/module
Device options Modularly extendable (compact combination of different electronic function modules)
SIL 2 (DIN EN 61508); PL d (DIN EN ISO 13849); Category 3 (DIN EN ISO 13849) with USC 42
Mechanical options Additional foot (solid shaft construction type)
MI: Saliferous environment
Special features and certificates For USC 42: SIL 2 (DIN EN 61508); PL d (DIN EN ISO 13849); Category 3 (DIN EN ISO 13849),
ystem-wide two channel architecture incl. internal cross-checking

Flohr Industrietechnik GmbH - Im Unteren Tal 1 - D-79761 Waldshut-Tiengen - Phone: +49 (0)7751 / 8731-0 - info@flohr-industrietechnik.de

Privacy policy

Our web site uses external components. These help us to constantly improve our offer and to provide you with a comfortable visit. By loading external components, data about your behavior may be collected by third parties, which is why we need your permission. Without your permission, there may be restrictions on content and operation. You can find detailed information in our Privacy policy.